RF3001 DP Mass Flowmeter
Key Features
- Reference accuracy: Flow measurement ±0.5%, ±1%
- Stability: Reference accuracy × Span / 3 years
- Output:4-20mA or 485 Communication
- Power supply impact: ±0.001% /10V (12 to 362V DC),
- Flow measurement range: 0 to 30 t/h
- Mass Flow Range: Upto 80mm with Tri Clamp Connection
- Preheat time: < 15s
- Ambient temperature: 0 to 65 ° C
- Storage temperature / transport temperature: -40 to 85 ° C;
- Wetted Parts : stainless steel 316L
- Filling liquid: silicone oil
- Transmitter housing: 316L pipe, 304 stainless steel cover
RF3200 Coriolis Mass Flowmeter
Coriolis mass flow meter are the leading precision flow and density measurement solution offering the most accurate and repeatable mass flow measurement for liquids, or slurry. The coriolis flowmeters offer the most accurate measurement available for virtually any process fluid, while exhibiting exceptionally low pressure drop.
Key Features
- Line Size: DN (mm) 3~250
- Structure: Integrate type (-50 ~+125)°C, Remote type (-50~+200)°C
- High temp. Separate Type (-50~+300)°C, Cryogenic: Remote Type (-200~+125)°C
- Sensor: Micro-bend type, Explosion-proof
- Power Supply (18~36) VDC or (85~260) VAC
- Signal Output Pulse 4-20mA
- Communication Port RS485 or HART
- Nominal Pressure (MPa) 1.6, 2.5, 4.0, 6.4, 10, 16, 25
- Accuracy +/-0.1% +/-0.2% +/-0.5%
RF3300 Electromagnetic Flowmeter
A magnetic flow meter (mag flow meter) is a volumetric flow meter which does not have any moving parts and is ideal for wastewater applications or any dirty liquid which is conductive or water based. Magnetic flow meters will generally not work with hydrocarbons, distilled water and many non-aqueous solutions). Magnetic flow meters are also ideal for applications where low pressure drop and low maintenance are required.
Key Features
- Linning Material: PTFE/PFA/Rubber/PU/Ceramic
- Sensing Velocity: 0.5 ~ 10m/s
- Repeatability: ±0,1%
- Fluid conductivity: >5μS/cm.
- Process Temperature: -40 ~ +150°C
- Storage temperature: -40 ~85°C
- Communication Option: Modbus or HART (opt.)
RF3400 Vortex Flowmeter
Key Features
- Austenitic stainless steel made Sensor
- Resolution up to ± 0.2%
- Standard 4-20 mADC Analog/ Pulse Output
- Compatible with RS232, RS485 & HART Communication Interfaces
- Li Battery powered remote version
- Heat Dissipation Function for High Temperature Application
RF3500 Turbine Flowmeter
Key Features
- Low pressure loss
- High Anti-Electromagnetic Interference Ability
- Anti-Vibration Design
- Wide Flow Measurement Range up to 800 m3/h
- Lower flow rate limit (0.04 m3/h)
RF3700 Thermal Gas Mass Flowmeter
Thermal mass flow meters, also known as thermal dispersion or immersible mass flow meters comprise a family of instruments for the measurement of the total mass flow rate of a fluid, primarily gases, flowing through closed conduits. Thermal gas mass flow meter is designed on the basis of thermal dispersion, and adopts method of constant differential temperature to measure gas flow. It has advantages of small size, easy installation, high reliability and high accuracy, etc
Key Features
- Compact size, easy installation, high reliability and high accuracy
- No need for temperature or pressure compensation
- Can be used for gas leak detection
- Good vibration resistance, no moving parts
- Available in Insertion and Flange Connection Type